major defects
英 [ˈmeɪdʒə(r) dɪˈfekts]
美 [ˈmeɪdʒər dɪˈfekts]
网络 主要缺陷; 主要问题缺陷; 严重缺陷; 主要缺失; 主要缺点
双语例句
- Because we delivered code at the end of each iteration, RUP allowed testing to start early, and it reduced the risk of major defects being identified much later in the project.
因为我们在每一个迭代结束后都发布代码，所以RUP让测试变得简单，并且降低了在项目的后期发现重大问题的概率。 - The article introduces some problems in the county banking financial services, which reflects eight major defects in their services and systems, and gives some solutions and suggestions.
文章分析了县域银行业金融服务存在的问题，反映出县域银行业金融机构服务制度安排存在着八大缺陷，并就存在的缺陷提出了解决办法和对策建议。 - This system inspects three major defects, i.e. ( 1) the defect which is darker than background,( 2) the defect which is lighter than back ground, and ( 3) the defect on pad.
这一个系统可以检验三种主要的瑕疵：（1）比背景暗的瑕疵、（2）比背景亮的瑕疵以及（3）焊垫的瑕疵。 - Weft streak is one of the major defects of habotai fabrics.
罗纹档是纺类织物纬向方面的主要病疵之一。 - Although the cost approach to setting transfer prices is relatively simple to apply, it has some major defects.
虽然，成本基础计价方法简单易行，但它有一些缺点。 - Other organ-specific, major birth defects were not significantly associated with maternal obesity.
其他的器官异常及严重的出生缺陷与母亲的肥胖没有明显的关系。 - In this paper, the mechanisms of formation of rolled-in scale and scale mark are analyzed which are the major surface defects of continuous hot rolled strip used for cold rolling.
对热轧板结疤缺陷和冷轧板成串孔洞缺陷进行取样，金相分析认为具有黑色纤维状组织的疤皮部分是钢基受撞后的分离物。 - The2006 China Automobile Customer Satisfaction Index ( CACSI) said major defects involve tyres, air conditioning and braking systems, locks and steering wheels.
2006年中国汽车消费者满意指数（CACSI）表明主要的瑕疵包括轮胎，空调，刹车系统，车锁与方向盘。 - The article analyses the causes of major defects generated during weaving and finishing processes and puts forward some preventive measures.
文章分析了氨纶弹性织物在织造和后整理过程中主要疵点的产生原因，并提出了预防措施，对企业生产具有指导意义。 - Explained EPS plates thin plaster external wall insulation systems major quality defects, and proposed control method against each defect.
阐述了EPS板薄抹灰外墙外保温系统主要质量病害，探讨了各种病害的防治措施，以提高工程质量。 - Effect of Measuring and Analysing DC Resistance of Primary Equipment on Detecting the Equipment Major Defects
测量分析一次设备直流电阻对发现设备重大缺陷的作用 - According to consumers major quality defects about continuous filament of polyester fiber, analyzed the reason that led to problems of quality and discussed methods for improving quality of continuous filament.
根据涤纶长丝用户在使用中发现的主要质量缺陷，分析造成这些质量问题的原因，探讨长丝质量改进的一些方法。 - By reviewing the evolving process of international environmental institutions, this essay analyzes the theoretical groundings, constituent elements, and different roles of the governmental and non-governmental actors, shedding light on the major defects in present-day international environmental institutions and on the urgency for institutional reforms.
本文在回顾国际环境制度发展进程的基础上，分析了其形成的理论基础和构成要素及政府和非政府行为体的不同作用，着重探讨了国际环境制度存在的主要缺陷以及机构改革问题。 - Government's public department has two major defects in the management and administration of the infrastructure.
政府公共部门对城市基础设施的经营管理存在两大缺陷。 - Formation mechanism and characters of major defects on stainless steel billet such as depression, crack, slag inclusion and deep oscillation mark, not easy to be removed, are analyzed considering steel composition, solidification character, thermal and mechanical properties.
从不锈钢的组成、凝固特点以及高温热性能和力学性能等方面具体分析不锈钢铸坯表面凹陷、裂纹、夹渣以及不易除掉的深振痕等缺陷产生的机理和特征。 - There exist major defects in conventional site tests of XLPE insulated cables with DC voltage, therefore, a new method with better testing results must be found.
根据XLPE绝缘电缆用直流电压进行现场试验的经验，要求开发新的方法。 - The nitriding porosity is one of the major defects influencing the quality of nitriding parts. It may lower the compactness of the white layer and decrease the case hardness, wear and corrosion resistance.
氮化疏松是影响氮化件质量的主要缺陷之一，可显著降低白层致密度，使表面硬度、耐磨性和耐蚀性下降。 - Based on the analysis and comparison of different processes for forming the typical forked parts on forging press, this paper discusses the major defects and quality control in forming process, as well as, the features and methods in planning the formation steps.
对典型叉型件在锻压机上成型的不同工艺方案进行了分析和比较，探讨了成型过程中的主要缺陷、质量控制及变型工步设计的特点和方法。 - Individualized Reconstruction of Major Mandibular Defects
下颌骨大型缺损的个体化修复 - Prenatal Screening for Major Fetal Defects by Using of Maternal Serum Markers
孕妇血清标记物用于严重胎儿缺陷的产前筛选 - The research development of major defects in RTM process
RTM主要缺陷的研究进展 - Chapter 3 gives a brief review of the development of Chinese FX market, and discusses the major defects of present FX market system in the background of further open-up of China's economy.
第三章简要回顾了中国外汇市场的发展历程，并讨论了外汇市场当前存在的若干问题和在中国经济进一步开放背景下的不适应性。 - However, with the hospital outpatient false refund, hospitalization deposit funds used cases occurred, has exposed the hospital internal control, especially the major defects of internal control of monetary fund.
然而，随着医院采购舞弊、门诊虚假退费、住院押金私自挪用等案件的相继发生，暴露出了公立医院内部控制尤其是货币资金内部控制存在重大缺陷。 - But in the process of talents training in China, there are three major defects: old education theories, ineffective education mechanism and lack of innovative mechanism.
但是，我国高等师范院校在人才培养过程中，存在极大的缺陷，主要表现在教育理论落后、教育机制不灵、创新机制乏力等三个方面。 - Specially, the major defects for the large-scale plastics such as automobile, instrument panel with the characteristic of long strip and large curved face are warp, sink mark and weld lines.
特别是诸如汽车保险杠、仪表盘这类长条形大曲面特征的大型注塑件，其主要的成型缺陷有翘曲变形较大，局部地方有缩痕和明显的熔接线。 - If common management mode of electronic records is applied to electronic records in minority languages, they will facing many challenges and major defects, such us the risk of long-term preservation, conflicts of coding and culture, barriers of understanding and access, and overall low efficiency.
按照通用模式进行少数民族语言电子文件管理，面临长期可读风险、编码冲突、文化冲突、理解障碍、获取障碍、整体低效等重大缺陷。 - The system is tested in the production line for 4 months. To the two major defects discussed in this article, central segregation and internal crack. Classification recognition accuracy rate are 98.4% and 96.3%, which reached the practical requirements.
系统在一线车间试运行4个月，对于本文研究的两大缺陷中心偏析和内裂，识别分类准确率分别达到98.4%和96.3%，达到实际的需求。 - Community correction low rate applicable to promote the development of community correction is major defects.
再次社区矫正适用率低是推进社区矫正发展的重大缺陷。 - The two main reasons for these four major defects are: 1. the time to hedge, 2.
这些缺陷存在的主要症结在于两方面：一是套期保值的时机选择问题，二是套期保值的保值比例问题。 - It shows that the wharf elastic performance meets the design requirements. 4. Dynamic loading test reflects that the dynamic properties are good. There are no major structural defects in the wharf.
动载试验反映结构动力性能良好，未发现码头存在重大结构缺陷。